Set up a command and run it
- As an owner or administrator, open the server and choose its Commands tab.
- Choose New command.
- Enter a Name, and if you like What it does. Moderators see both.
- In Command, type the command and put each blank between curly brackets, for example kick {player} {reason}. Each blank appears under Blanks. Give it a Label and choose what it Takes: Text or Digits only, with a Shortest and a Longest.
- Check the Example, make sure Moderators can run it is on, and choose Save.
- A moderator opens the same Commands tab. It is one list for everyone: they choose a command, fill in the boxes and choose Run.
- The result shows under the command, for example Ran the command on the server's name, with what the server replied. A long reply is cut and says Shortened.
- In Discord, a linked member with permission can type /run, pick an enabled command and fill in the boxes. The reply comes back privately. Connect your Discord server first.
What to expect
- Moderators never see the console or the command itself, only the boxes you made.
- Owners, administrators, operators and moderators on that server can run a command. A viewer cannot.
- A moderator can type letters, numbers, spaces and . , _ - : @ # + ! ? in a box. Anything else is refused, and nothing is sent.
- To stop moderators using a command, turn off the switch beside it. Choose Edit to change it or Remove to delete it.
- Only an owner or administrator sees New command, the switch, Edit and Remove.
If something goes wrong
- The server is not running: start it, then run the command again.
- Could not reach the server: the host is offline. Try again when it is online.
- An admin changed this command: check the boxes and run it again.
- You can't run commands on this server: ask an owner or administrator.
- Not confirmed: check in the game before trying again.