Skip to content

Connect and manage a rented server

Connect your hosting company, check what works and fix a connection.

Connect your server

What RustSC can do depends on the host and the access your details allow. Use the host's own panel for anything that is not offered.

  1. When you add a server, choose Connect a rented server and select your host.
  2. Enter the details requested. Your host's panel has the server page, key or file login, depending on the host. Add the console details if offered and you want to send commands.
  3. Choose Check. Read what works, then choose Connect.

Check or change the connection

  • Choose Check again on the connected server to refresh what works. If the host is not answering, check its panel and try again.
  • If a different key is needed, make one in your host's panel. Open the server's Settings, find Connection, enter the details again and choose Save changes. The saved key is not shown.
  • If the console is missing, use Add console where offered and enter the details from your host. A file login can also be added where offered.
  • To stop using RustSC with the server, choose Disconnect and confirm. RustSC forgets the saved key; the server stays with your host.

Analytics settings

Analytics are off.

Help improve RustSC with page counts and performance measurements. Privacy details