Skip to main content

Why did your Rust Industrial Conveyor stop moving items?

A powered conveyor can sit idle when a filter or destination prevents a transfer. Test one known item along a short path before changing the whole network.

Check the path from box to box

Use two spare storage boxes and a conveyor if the main network holds items you want to leave in place. Check that the Storage Adaptor on the source feeds the conveyor's industrial input and its output goes to the destination. Supply power, turn on the conveyor and try one inexpensive item with no filter to see that it reaches the spare box.

Check what the filter tells the conveyor to keep

Suppose your stone box holds 120 stone and you want it to keep 100. Set a minimum of 100 for stone with space in the destination and no other limits for the test. After the transfer settles, check the source kept 100 and the destination received the excess 20. Use the same kind of before and after count to check the real circuit.

Check what the filter tells the conveyor to keep
Setting to checkWhere to look for the cause
MinimumCheck how much of that item is already in the source. This setting leaves a reserve there.
MaximumCheck how much of that item is already at the destination.
BufferCheck whether the source has enough for the required batch size.

Verify one transfer on the original route

Once the filter does what you expect on the test boxes, check the existing filter and spare space in the actual destination. Adjust only the rule that blocked the transfer. Watch the source and destination counts to check the right items moved and the reserve you want stayed put.

Sources

Analytics settings

Analytics are off.

Help improve RustSC with page counts and performance measurements. Privacy details