
Check what your Rust gather multiplier actually changes
A 2× stone setting for hitting a rock says nothing about picking up stones or running a quarry. Gather Manager gives those paths separate settings. Give the server listing wording that fits the paths you actually test.
Collect your comparison samples first
Use a spare world with Gather Manager as the only rate changer. For stone mining, use the same tool and comparable fresh nodes in both tests. Compare the same part of the mining sequence because the yield can change from one hit to the next. For a ground pickup, start with an empty inventory and take one matching collectible. For a quarry, start with empty output and compare the same completed work under both settings.
Record what went into the inventory
Keep a row for each source. Try the intended multiplier on the disposable world. Record the numbers you actually see rather than assuming each source changed.
| Source | Gather Manager setting | Record |
|---|---|---|
| Stone mining | The stone rate under dispenser | Stone received across the same set of hits. |
| Stone collectible | The stone rate under pickup | Stone in inventory after one pickup. |
| Mining Quarry | The stone rate under quarry | Stone produced for the selected amount of work. |
Read a mismatch before adjusting a second setting
If a rock gives more on every hit but still runs out sooner than you expected, check yield per hit and total output separately. Gather Manager documents dispenser scaling for how much is available from a node. Review item-specific rates where you use a wildcard because an explicit rate can override it.
If a path still looks unchanged, confirm it appears under the expected setting and review other plugins or modules that also affect yields. Then rerun only that row. If mining and pickups match the promise but quarry does not, advertise the measured rule, such as ‘2× mining and pickups; normal quarry output.’