# Manage several servers at once

Send a message, change access or copy settings to a group of servers.

## Preview and apply a change

**Cancel what has not started** leaves completed changes in place. If a result is unknown, check that server before sending another change.

1. Open **Servers**, then **Bulk actions**. Choose the action and enter its details.
2. Select the servers or a saved group. To reuse a selection later, choose **Save group** and give it a name.
3. Choose how the servers start, then choose **See what will happen**. Check the names and read the result for each server.
4. Confirm only the servers you intend to change. Open **Results** to see which finished, which are waiting and which need attention.

## Copy settings between servers

1. Use **Settings profiles** to create a profile with the settings you want to copy. Saving the profile changes no server.
2. In **Bulk actions**, choose **Settings**, select the profile and the target servers, and preview the changes.
3. Check which values each server will keep before confirming. If you need to undo a completed settings change, choose **Put the old settings back** where offered and check its preview.

## Compare servers or a group

A server with no reading can make the total player count dip. Check its last report before acting on a change.

1. In **Bulk actions**, choose **See players and frame rate of all servers**, or **See this group together** for a group.
2. Choose a period. Check how many servers reported, then open a server’s performance for a closer look.

HTML version: https://rustsc.com/support/guides/bulk-actions/
